Guide to Clean Rangehood Filters
Have you ever prepared a tasty meal only to find your kitchen afterwards smells greasy and a bit stale? Yep, then it could be the rangehood filter that is the culprit. These are significant filters that prevent dirtying the kitchen with grease, smoke and odours. But they do ultimately clog and become inefficient, which not only affects your cooking environment, it also puts a strain on your appliance. The great thing is that it is not as difficult as it might sound to clean them. It is not difficult to repair your rangehood filter and put it back in its proper state. Five easy steps, as per bond cleaning, will get you here.
Step 1: Clean the Filter Carefully
Turn off your rangehood, and make sure everything is cool. The rangehood filters are simple to extract, sliding or popping them out. See your user manual just in case. Keep them dry, because they may have formed grease, which makes them very slippery.
Step 2: Make a Cleaning Solution
Now the filter is out, and you have to make a cleaning bath. Fill your sink or a large basin with hot water and pour a lot of dishwashing liquid in it. To give it an even greater fighting power against grease, half a cup of baking soda can be added. The heat and cleaning agents will be used together to help loosen tough grease and dirt.
Step 3: Soak the Filter
Wet your range hood filter with a hot solution and allow it to sit in the hot solution for 15-20 minutes. This is an important step as it gives the grease time to be broken down, and hence easier to clean up later. During this period, you can also use a wet cloth to clean the inside of your rangehood to get rid of grease on the surface.
Step 4: Scrub Away the Grease
Wet scrub the filter using a non-abrasive brush or sponge. Please ensure that areas with oil are washed, yet they should not be scrubbed too hard, as this will damage the mesh or metal. In order to get out those tough stains, repeat the process and dip your brush in baking soda, and continue scrubbing it, it will work miracles in getting out grease.
Step 5: Rinse and Dry
After cleaning, run water over the filter to rinse it off with soap and loosen dirt. Get rid of all the water and use air to dry the filter fully before replacing it. Do not store it when wet, as it may encourage mould or performance, as per bond cleaning.
Conclusion
The reason is that cleaning your rangehood filters may be a simple job, but that can go a long way. It makes your kitchen smell fresh, but it also ensures that your rangehood will work well in future. In regards to cleaning rangehood filters, these five simple steps will assist you in reducing grease and maximising airflow, along with maintaining a healthier cooking environment. A dirty filter makes a dirty kitchen, and every house cook should have a clean one!